SR Meeting Table Series-SR

Information

Size

Remark

  • Table board inner material: It is made of high-density E1 plywood, and the thickness is 25m/m, and the thickness is 0.7m/m. It is in line with the national standard; the back is thick and 0.7m/m white matte board, Compressive and horizontal effect.
  • On the base: 250m/m*250m/m thick 3m/m body plate stamping, rust-proof and the surface electrostatic powder coating paint.
  • Middle tube pillar: outer diameter Φ76.2 (3"), pipe thickness 1.5m/m, iron pipe is welded on the base, rust-proof and the surface is painted with electrostatic powder.
  • Lower chassis: Φ495m/m*3m/m thick, plastic injection molding, surface vacuum plating.
  • Under the base: Thick 6m/m*491m/m steel plate stamping, rust-proof and surface electrostatic powder coating paint.
  • Ground Regulator: Nylon plus 40% fiber screw thread injection molding, a total of 5 levels can be adjusted.
  • Edge banding: thickness of 10m / m full week gray / white / transparent three-color extrusion molding, with beautiful desktop protection.
SR-090S W900 x D900 x H750mm
SR-090R W900 x D900 x H750mm

Reviews

There are no reviews yet.

Be the first to review “SR Meeting Table Series-SR”

Your email address will not be published. Required fields are marked *

Table board inner material: It is made of high-density E1 plywood, and the thickness is 25m/m, and the thickness is 0.7m/m. It is in line with the national standard; the back is thick and 0.7m/m white matte board, Compressive and horizontal effect.
On the base: 250m/m*250m/m thick 3m/m body plate stamping, rust-proof and the surface electrostatic powder coating paint.
Middle tube pillar: outer diameter Φ76.2 (3″”), pipe thickness 1.5m/m, iron pipe is welded on the base, rust-proof and the surface is painted with electrostatic powder.
Lower chassis: Φ495m/m*3m/m thick, plastic injection molding, surface vacuum plating.
Under the base: Thick 6m/m*491m/m steel plate stamping, rust-proof and surface electrostatic powder coating paint.
Ground Regulator: Nylon plus 40% fiber screw thread injection molding, a total of 5 levels can be adjusted.
Edge banding: thickness of 10m / m full week gray / white / transparent three-color extrusion molding, with beautiful desktop protection.

Description

  • Table board inner material: It is made of high-density E1 plywood, and the thickness is 25m/m, and the thickness is 0.7m/m. It is in line with the national standard; the back is thick and 0.7m/m white matte board, Compressive and horizontal effect.
  • On the base: 250m/m*250m/m thick 3m/m body plate stamping, rust-proof and the surface electrostatic powder coating paint.
  • Middle tube pillar: outer diameter Φ76.2 (3″), pipe thickness 1.5m/m, iron pipe is welded on the base, rust-proof and the surface is painted with electrostatic powder.
  • Lower chassis: Φ495m/m*3m/m thick, plastic injection molding, surface vacuum plating.
  • Under the base: Thick 6m/m*491m/m steel plate stamping, rust-proof and surface electrostatic powder coating paint.
  • Ground Regulator: Nylon plus 40% fiber screw thread injection molding, a total of 5 levels can be adjusted.
  • Edge banding: thickness of 10m / m full week gray / white / transparent three-color extrusion molding, with beautiful desktop protection.

Additional information

Model

SB-C20

Dimension (mm)

W665 X D340 X H422

Slot size (mm)

W100 X D200 X H65

Color

White

Materials

Iron, ABS, Plastic

Reviews

There are no reviews yet.

Be the first to review “SR Meeting Table Series-SR”

Your email address will not be published. Required fields are marked *

SR Meeting Table Series-SR